Talking about the "Stickiness" and "Viscosity" of EVA furniture Hot Melt Adhesive
When many customers consult hot melt adhesives, they will always ask if your hot melt adhesive is strong. This strong stick means "stickiness". Without specifying what material to stick, it cannot be directly said whether the hot melt adhesive is strongly sticky. Hot melt adhesives are only suitable and inappropriate, and there is no strong or weak viscosity. This is a misunderstanding of many customers in consulting. Viscosity is an important parameter of hot melt adhesive. Viscosity is also called viscosity, which refers to the degree of the thinness of hot melt adhesive in the molten state. The lower the viscosity, the better the fluidity of the hot melt adhesive, the easier it is to produce glue, and the less stringing. The disadvantage is that the internal torque is not enough, which easily leads to a separation between the glue and the glue. The higher the viscosity, the worse the fluidity of the hot melt adhesive, the higher the melting point, and the more stringing. The advantage is that the internal torque is sufficient and there will be no problem of direct separation between the glue and the glue. Only when you know which specific material to stick, can you compare which rubber particles have good stickiness? As a professional manufacturer of hot melt adhesives, Hori hot melt adhesives will recommend the most suitable and cheapest hot melt adhesives to customers. It is not that the more expensive hot melt adhesives are better, the right is the king.
|